Who knows how to change a flat tyre?π
Here are some tips from Crescent Motoring Services! Hope you find these useful!
Changing a tyre on your car can seem like a daunting task if you’ve never done it before, but it’s actually a straightforward process!

Here are the basic steps you need to follow:
- Find a safe and level place to change your tyre. Ideally, you want to be away from traffic and on a flat surface. Turn on your hazard lights to alert other drivers.
- Locate your spare tyre, jack, and locking wheel nut. They should be in your glove compartment, boot, or under your car. You may need to remove a cover or carpet to find them.
- Loosen the locking wheel nuts on the flat tyre. Use the locking wheel nut to turn them anti-clockwise. Do not remove them yet.
- Position the jack under the car in the appropriate spot. Your car’s owner’s manual should have instructions on where to place the jack. Use the jack to lift the car off the ground.
- Remove the nuts by hand and pull the flat tyre off the wheel hub.
- Place the spare tyre on the wheel hub and hand-tighten the lug nuts.
- Lower the car back down to the ground using the jack.
- Use the locking wheel nut to tighten the nuts in a criss-cross pattern. Tighten them as much as possible, but don’t use too much force.
- Double-check that all wheel nuts are tightened and secure.
- Put everything away in your boot!
That’s it! Remember to drive carefully on your spare tyre and get your flat tyre repaired or replaced as soon as possible.
However, if you don’t fancy giving it a go, let us know and we can do this for you.π
We can check all of the tyres and ensure you get the right replacement for the one that is replaced. So, if you are looking for replacement tyres in Burton on Trent, call Crescent Motoring Services on 01283 509000!

